(1) add fingerprint for the first time (Manager):: press the set button for about 5 seconds, first, the blue light is short, then the green flashes and then propagate Will have to set the city fingerprints at the middle of the finger touch. If the information has been collected, the blue lights to indicate that data can be saved. If not recorded or failed, will flash a red light to remind the collection to be incorrect. After a successful acquisition, after 10 hay, the green light, which the fingerprint will increase. Greenlight flashing during the entire process of fingerprint input (Which is the fingerprint entry status) but the multi-colored lights not illuminated at the same time The finger that touches the pressure requires multiple angles to collect, which have health benefits, expand information and are useful for sensitivity judgment.
(2) add fingerprint member: add fingerprint when then fingerprint: press set up for about 5 seconds, the blue light will short circuit once and then launch the blue light, long enter the system administrator (2 administrators) so that Of the fingerprint (that is, the first or second fingerprint set), when the fingerprint admin input is correct, the indicator light changes from blue to green and flashes. Repeat the first step to complete the fingerprint.
(3) Remove fingerprints: in the mode, press the setting button for about 10 seconds, the blue light for 2 times, then launch, the red light, and the administrator Touch the fingerprint (two any administrators). Next, if the fingerprint is normal, the green light and the fingerprint will be deleted.
(4) Lock: Immediately after pressing the lock beam for about 1 second in the unlock state, it will lock immediately.
(5) Unlock: In the lock state, fingerprint input If the fingerprint is correct, the lock beam will automatically pop up and unlock. If the fingerprint is correct, the green is short; Invalid fingerprint, short red light
(6) Low voltage: when the voltage is equal to or below 3.5 V, the red light will flash for 15 seconds; If always low power, every minute report to the police once.
(7) Charging: red and green lights alternately between charging processes
Tips for saving fingerprints:
1. Try touching the sensor by different angles when locking the fingerprint record to make sure it can be recognized well during operation.
2. Follow the steps strictly, save your fingerprint to make sure the process can be done easily.
1 * Fingerprint lock
1 * USB charging cable
1 * User manual